More About Our Vinyl Window Graphics
We stock four main types of window graphic (clear self-adhesive vinyl, white self-adhesive vinyl, perforated window graphics, and easydot repositionable vinyl) that cover a range of uses, and come in a range of finishes. Before choosing your vinyl consider if you want your graphic to be placed indoors or outdoors, whether you need a standard or custom cut, if you require the window graphic image to be printed normal facing or reverse printed, if you require your window graphic to add privacy to a room whilst still allowing you to see out, or if it needs to block out the glare or heat from direct sunlight. Once you’ve answered all these questions a quick look through our four options will let you know the best window graphic vinyl choice for your needs.
Understanding Your Window Graphic Options
Clear Vinyl: This can be displayed straight on the surface or if it needs to be reverse printed to be displayed through a window for example. If it is to be displayed in this way choose the ‘reverse print option’ when ordering.
Next choose your backing option. Clear vinyl will allow visibility and let light through around your graphic, flood white backing will block all light and visibility around the graphic.
As well as offering standard shaped vinyl graphics we can cut your graphic to a custom shape after printing. We even offer interior cutting which allows you to have exposed areas in the middle of the design.
White Vinyl and Easy Dot Repositionable: Our white self-adhesive graphics have a solid white backing which provides a great way of covering up a surface you want to be hidden, reusing a rigid-board sign, or creating privacy from over-looked windows. White vinyl graphics should be used if you want to print in solid colour with no transparency showing through.
Our printed vinyl is available with the option of standard white adhesive or a special grey adhesive that helps to cover over existing graphics you may wish to obscure. We also offer the option of an easily removable and repositionable ‘easydot’ vinyl, which is a great choice for short-term applications or if you need to protect the surface onto which you’re placing your vinyl graphics.
As well as offering standard shaped vinyl graphics we can cut your graphic to a custom shape after printing. We even offer interior cutting which allows you to have exposed areas in the middle of the design. Please use the ‘comments’ section for any specific cutting instructions.
Perforated: Our one-way vision window graphic material allows you to see out of your window and through the graphic but prevents people from seeing in through the graphic. It’s commonly used on bus windows, but also works brilliantly for store, bar and office windows, and is an attractive way of hiding less than pretty spaces in your workplace from public view.
How To Install Your Vinyl Window Graphics
We offer a professional installation service which is ideal for large or complicated wall graphic designs, and all of our work is guaranteed for 2 years. For easier and smaller vinyls, we recommend using the following instructions to install window graphics:
- Firstly, make sure the surface you’re using is clean of dirt, dust, grease, and any form of contamination. You can do this by mixing some warm water and washing up liquid to wipe the area clean.
- Wet the surface area where your vinyl is going.
- Peel off the backing layer of your vinyl and position it how you want it. The wet surface will allow you to easily move your vinyl around and place it into the correct position.
- Use a squeegee to gently remove any liquid and air bubbles, whilst taking care to not damage or stretch the vinyl in the process.
- Allow the vinyl to dry for 24 hours.
Need Help Designing Your Window Graphic?
Struggling to design your window vinyl graphic? No problem! Just select the ‘Design & Print’ option and choose the standard or advanced package, if you’re not sure which suits your needs best please contact us. Any assets you have, such as logos or imagery can then be uploaded and a design brief left in the notes section. Next proceed through to checkout to pay for your vinyl graphic. After we process your order a member of our design team will contact you with a design for your approval.
Any questions or queries please contact us on 0800 612 9266 or email us at info@bigartandbanners.com. Our team of vinyl graphic experts are standing by to help!
Be sure to also check out some of our other vinyl printing services including, wall graphics printing, floor graphics printing, One-Way Vision perforated window film for indoor and outdoor use, frosted window film, clear self-adhesive vinyl and white self-adhesive vinyl printing. We also provide a wide range of other large format printing services including PVC banner printing, mesh banners, roller banners, fabric banners, flag printing, poster printing, pop up stands and board printing to cover all your advertising and promotional needs.
Window Graphics Printing FAQs
What are self-adhesive vinyl graphics?
Our self-adhesive vinyl graphics are made from a thin film. They are recommended for use on smooth, flat surfaces that have been properly prepared beforehand. The suitability for each vinyl will depend on the finish you are looking for, the application, and the amount of time intended for its use.
How do I install a window graphic?
- Firstly, make sure the surface you’re using is clean of dirt, dust, grease, and any form of contamination. You can do this by mixing some warm water and washing up liquid to wipe the area clean.
- Wet the surface area where your vinyl is going.
- Peel off the backing layer of your vinyl and position it how you want it. The wet surface will allow you to easily move your vinyl around and place it into the correct position.
- Use a squeegee to gently remove any liquid and air bubbles, whilst taking care to not damage or stretch the vinyl in the process.
- Allow the vinyl to dry for 24 hours.
We also offer a professional installation service which is ideal for large or complicated wall graphic designs, and all of our work is guaranteed for 2 years.
How do I order the correct size?
Simply measure the area you wish to fill and enter this on our website using your preferred unit of measurement. Please note, it is advisable to order your vinyl a few millimetres larger than you require in order to account for any surface deficiencies. You can then simply trim any excess that there may be once installed. We also advise that there may be up to a 3mm size tolerance on your finished vinyl. This can be due to a variety of factors such as trimming, temperatures, and lamination.
How big can you print your vinyl window graphics?
We can print any size you require, but it may be split into sections. How wide we can print in one piece depends on the material being used. The roll widths (at industry standard) are as follows:
- Clear Self Adhesive Vinyl - 1350mm
- White Self Adhesive Vinyl - 1350mm
- Perforated Window Graphics - 1350mm
- Easy Dot Repositionable Vinyl - 1350mm
Please leave us a note if you have any preference on how we split your vinyl.
What is Clear Self Adhesive Vinyl?
Clear Self Adhesive Vinyl is a transparent vinyl that when printed will remain transparent through the ink. No white ink will be printed, so any white areas on your artwork will be clear.
What is White Self Adhesive Vinyl?
White Self Adhesive Vinyl is an opaque vinyl for a print with no transparency. Any clear areas on your artwork will be white unless contour cut.
What are Perforated Window Graphics?
Perforated Window Vinyl is made from a perforated vinyl that you can see through from one side but not the other. This makes it perfect for advertising on areas where privacy is wanted, such as on vehicle windows or office buildings. The perforations are approximately 1mm in diameter, with approximately 5mm of vinyl before the next perforation.
What is Easy Dot Repositionable Vinyl?
Easy Dot Repositionable Vinyl is an opaque low-tack vinyl that allows for the graphic to be easily applied and easily removed. Suitable for short term uses only.
Can self-adhesive vinyl graphics be used outdoors?
Yes! Our vinyl graphics are weatherproof and printed with waterproof and scratch-resistant eco-solvent inks.
Why use white-backed vinyl graphics?
White-backed vinyl graphics are great if you want to cover up the surface where you are sticking the graphic (such as a scratched window or even an old rigid-board sign). White vinyl graphics are also the better choice when you want to print in full, solid colour without transparency showing through.
How do I design a window vinyl graphic?
The first thing to decide when ordering a window graphic is whether you will be displaying it positioned on the inside or the outside of your window. If you decide to display from within, then you will need to select the “Reverse Print” option so it appears the correct way around when viewed from outside. You will also have to decide whether you want a backing for your vinyl graphic, which will block visibility of the surface behind it.
Can you custom cut an image?
Graphics can be contour cut to any shape from an .ai file containing your cut path. If you're unable to provide a cut path, please select contact us.
How do I order a window graphic?
To place an order online, simply select your options and upload your artwork, or choose our design service on this page and proceed through checkout.
Can you colour match?
Our printers produce CMYK images and artwork supplied in this format will be printed with the colour values stated. We do offer a personalised colour matching service please contact our sales office for more information and pricing.
Can you edit my artwork?
Yes, we can make amendments to your artwork. For this you will need to select one of our design services, which will allow for approx 1 hour or 2 hours design time depending on the package you choose.
Can I collect from store?
If it is convenient for you to collect or arrange collection from our factory in Manchester, you can select this option during the checkout process.
